Security and Inputs/Outputs (I/O) This conference is for topics related to HAL's security and I/O features and the third-party controllers that have those features and that can be used with HAL. |
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Member
Join Date: Dec 2006
Location: Athens, Ga
Posts: 52
|
![]()
All,
I spoke with the team about 6 months ago when integrating my SCHLAGE Zwave deadbolts. I was told that 5.2 would not support these systems due to some problem with the command coming from a slave vice a master controller and the encryption method used. I was advised that 6.0 would have this fixed. Can you advise? I configured Ultra today, no luck with the lock. Heading out of town for a few weeks for work, but thought I would raise the subject. Thanks in advance. dave |
![]() |
![]() |
![]() |
#2 |
Administrator
Join Date: Jul 2003
Location: Laurel, MD
Posts: 1,588
|
![]()
Hello Dave,
We have added the Secure Send which will send any Z-Wave message with a secure encryption. You must have a Vizia RF and VRC0P with a +3 on the back label. Use the Vizia RF as the primary and the VRC0P as the seconday controller. Regards, Tim
__________________
Tim Shriver Home Automated Living |
![]() |
![]() |
![]() |
#3 |
Member
Join Date: Dec 2006
Location: Athens, Ga
Posts: 52
|
![]()
Hey Tim,
Thanks for the response. I want to make sure I understand what you are saying here: -Current Primary Z-Wave Controller - Vera Lite - I have the mesh network setup here. -Secondary controller is the Vizia RF +3 set up in HAL. (its a scene controller int he network) Are you saying that I can't use the VERA in the network at all and that the Vizia RF+3 should be set as the primary controller with the VRCOP connected in HAL as the secondary? If this is the case, its disappointing as I want to keep the VERA Lite as the master. All other Z-wave systems work through HAL with the exception of the SCHLAGE Deadbolt. Thanks as always. Dave |
![]() |
![]() |
![]() |
#4 |
Administrator
Join Date: Jul 2003
Location: Laurel, MD
Posts: 1,588
|
![]()
Hi Dave,
After you are done configuring the door lock you should be able to make the VERA the primary again. I would do this in two steps. Make sure you are able to control the door lock using the Vizia RF and VRC0P. Then switch the migrate to the VERA as the primary. Tim
__________________
Tim Shriver Home Automated Living |
![]() |
![]() |
![]() |
#5 |
Member
Join Date: Dec 2006
Location: Athens, Ga
Posts: 52
|
![]()
Thanks Tim.
I will play with this over the weekend and let you know how it turns out. Thanks for taking the time to work with me. Dave |
![]() |
![]() |
![]() |
#6 |
Administrator
Join Date: Jul 2003
Location: Laurel, MD
Posts: 1,588
|
![]()
Dave,
If you have problems, I have a HAL dealer in mind that has done this type of setup and may be of assistance. Regards, Tim
__________________
Tim Shriver Home Automated Living |
![]() |
![]() |
![]() |
Bookmarks |
Tags |
locks, schlage, zwave |
Currently Active Users Viewing This Thread: 3 (0 members and 3 guests) | |
|
|
|