Security and Inputs/Outputs (I/O) This conference is for topics related to HAL's security and I/O features and the third-party controllers that have those features and that can be used with HAL. |
|
Thread Tools | Display Modes |
|
04-08-2016, 10:41 AM | #1 |
Member
Join Date: Dec 2006
Location: Athens, Ga
Posts: 52
|
Re: NAPCO GEM9600 Sensor Issue
Hi Tim,
Thanks for the reply. Yes, I am using the serial cable provided and the PCI Mini adapter to the panel. I've had it installed for 5-6 years now with no problem. Its odd that it reads some zones and not others. I can swap the cable and the PCI mini interface to troubleshoot, I have a spare. Just downloaded 6.1.12 with Tylers help.......nice guy and excited about checking it out. Thanks again! dave |
04-08-2016, 11:47 AM | #2 |
Member
Join Date: Dec 2006
Location: Athens, Ga
Posts: 52
|
Re: NAPCO GEM9600 Sensor Issue
Tim,
One more interesting note: I went and cycled each zone while monitoring the system monitor to verify proper reading of each zone cycle in HAL. The systems monitor correctly reads the zone, but when looking at Homenet on another machine, the zone is still not displayed. The zones which are displayed in Homenet do toggle correctly. Pic attached. Thanks! dave |
04-17-2016, 07:51 PM | #3 |
Member
Join Date: Dec 2006
Location: Athens, Ga
Posts: 52
|
Re: NAPCO GEM9600 Sensor Issue
Hi Tim,
Just back form work and was going to work this issue this week. Did you have any luck chasing this one down? Thanks! |
Bookmarks |
Tags |
napco, security, sensors |
Currently Active Users Viewing This Thread: 2 (0 members and 2 guests) | |
|
|
|